Algodue

Algodue Elettronica have been active on the international market for several years they have acquired a wide experience both in customer care and solution providing.
They steadily invest in new technology as well as in new solutions to enhance and increase the product range and to guarantee a service, both to keep up with the times.
Thanks to the interplay of the wide range of products, their flexibility and the 20-years experience in the energy sector help us offer application-oriented solutions and achieve customer satisfaction. In 2016, ALGODUE has merged with the Socomec Group

PQM4000 Power Quality Analyzer (Class A)

  • Harmonics and inter-harmonics measurement
  • Data recording for further EN 50160 analysis
  • Data recorded in standard PQDIF and CSV file formats
  • Embedded web server
  • Additional voltage and current measurement channels in comparison with other standard three-phase devices.
  • Current inputs for CTs or for clamps to grant an accurate current measurement.
  • Continuous monitoring of the power quality and Class A certified measurements for voltage characteristics.
  • Simultaneous recording of events, Min/Avg/Max LOG and energy counters.
  • Several possibilities for instrument data transmission: Ethernet, WIFI, Modbus RTU/TCP, USB.
  • User-friendly instrument web interface with multilingual pages.
  • IEC/EN 61000-4-30 compliance

UPM309 Power Meter with 8MB memory

  • DIN 96x96 ultra compact version, only 39 mm depth
  • Fully bi-directional four quadrants measurements for all energies and powers
  • Main electrical parameters measured and displayed for a cost-effective consumption analysis
  • Version for 1 or 5A CT and for direct connection up to 6A
  • Possibility to connect by PT
  • Up to 8 MB for data recording (ENH version)
  • Possibility to record all energy counters (ENH version)
  • Up to 24 parameters selectable among real time measurements for MIN/AVG/MAX recording (ENH version)
  • MODBUS RTU/ASCII communication by RS485 port or MODBUS TCP communication by Ethernet port
  • Possibility to manage the instrument in remote mode by WintoolNET software or by Web server interface
  • 2 digital outputs, 1 digital input, 1 analog output (optional)

UEM80 Energy Meter with direct connection up to 80A

  • UEM80-4D R for RS485 Modbus RTU/ASCII communication
  • UEM80-D M for M-Bus communication
  • UEM80-4D E for Ethernet (Modbus TCP) communication
  • Direct connection up to 80 A
  • Fully bi-directional four quadrants measurements for all energies and powers
  • For 3 / 4 wire networks with balanced or unbalanced load (UEM80-4D R and UEM80-4D E only for 4 wire networks)
  • Class B according to EN 50470-3
  • S0 output for energy pulse emission
  • Available with MID certification

UEM1P5 Energy Meter with CT connection 1/5A

  • UEM1P5-4D R for RS485 Modbus RTU/ASCII communication
  • UEM1P5-D M for M-Bus communication
  • UEM1P5-4D E for Ethernet (Modbus TCP) communication
  • For 1 or 5A CT
  • Programmable CT ratio
  • Fully bi-directional four quadrants measurements for all energies and powers
  • For 3 / 4 wire networks with balanced or unbalanced load (UEM1P5-4D R and UEM1P5-4D E only for 4 wire networks)
  • Class B according to EN 50470-3
  • S0 output for energy pulse emission
  • Available with MID certification

MFC Flexible Rogowski Coil

  • Suitable to measure currents from mA to hundreds of kA
  • High linearity
  • Wide dynamic range
  • Very useful with large size or awkward shaped conductors or in places with limited access
  • No danger from open-circuited secondary
  • Not damaged by large overloads
  • Non-intrusive, no power drawn from the main
  • Thanks to its light weight, it can be changed on the measured conductor
  • Totally shielded
  • File UL n. E231725-A1-UL